BCDFY - TEFLON ENAMEL, BLACK, 855-255,(21980)
- MSDS: BCDFY
- Manufacturer: E I DUPONT DE NEMOURS AND COMPANY INC
- Product Name: TEFLON ENAMEL, BLACK, 855-255,(21980)
- National Stock Number: 8010-00K001589
Product Identification
Product ID:TEFLON ENAMEL, BLACK, 855-255,(21980)
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001589
MSDS Number: BCDFY
Responsible Party
WILMINGTON, DE 19899
US
Emergency Phone: 800-441-7515
Info Phone: 800-441-7515
Cage: DO229
Contractor
Telephone: 800-441-7515
Cage: DO229
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 6.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 3.0%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHER ALCOHOL
Fraction By Weight: 1.0%
NON-AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED, WT % BY
Fraction By Weight: 90.0%
Hazards
Effects of Overexposure:THERMAL DECOMPOSITION PRODUCTS MAY CAUSE
POLYMER FUME REVER.INDCATRS:CHILLS,FEVER,& FLU-LIKE SYMPTMS
First Aid
First Aid:INHALATION:MOVE TO FRESH AIR TO IMPROVE BREATHING;SKIN:WASH
WITH SOAP & WATER.REMOVE CONTAMINATED CLOTHING;EYES:FLUSH WITH
WATER FOR AT LEAST 15 MIN.CALL A PHYSICIAN.
Fire Fighting
Flash Point:20-73F (CC)
Lower Limits:0.9
Upper Limits:7.0
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:COOL CLOSED CONTNRS W/H*2O USING FOG NOZZLES.
Accidental Release
Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS, AND OPEN
FLAME.CLOSE CONTAINERS AFTER EACH USE.WEAR SYNTHETIC GLOVES.
Other Precautions:WASH THOROUGHLY AFTER HANDLING & BEFORE EATING OR
SMOKING;OBSERVE LABEL PRECAUTIONS;EXPLOSV REACTION MAY OCCUR ABOVE
796F W/FINELY DIVIDED AL/MG;REMOVE IGN SOURCE IF SOLVENTS ARE
PRESENT.
Exposure Controls
Respiratory Protection:USE A CARTRIDGE TYPE RESP IF AIR CONTAMINANTS
CONTROL IS NOT FEASBLE
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:USE APPROPRIATE INDUSTRIAL HYGIENE PRACTICES
Supplemental Safety and Health
MSDS FM MFR DATED:03/20/80:VAP PRESSURE/DENSITY OF PRINCIPAL SOLVENT.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:228-473F
Vapor Pres:37
Vapor Density:3.1
Spec Gravity:1.265
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SEMI-VISCOUS LIQUID WITH CHARACTERISTIC ODOR.
Percent Volatiles by Volume:68.1
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, CORROSIVES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition
Products:CO,CO*2,HF,CF*4,COF*4,PERFLUOROISOBUTYLENE
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.